Table of Contents
Advertisement
Troubleshooting
Problem
The Clavinova does not turn on.
A click or pop is heard when the power is
turned on or off.
Noise is heard from the speakers or head-
phones.
The overall volume is low, or no sound is
heard.
The damper pedal has no effect, or the sound
continuously sustains even when the damper
pedal is not pressed.
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha Clavinova.
HPE-160 Stereo Headphones
High-performance lightweight dynamic headphones with extra-soft ear pads.
Possible Cause and Solution
The Clavinova has not been plugged in properly. Securely insert the female plug into
the socket on the Clavinova, and the male plug into a proper AC outlet (page 12).
This is normal when electrical current is being applied to the instrument.
The noise may be due to interference caused by the use of a mobile phone in close
proximity to the Clavinova. Turn off the mobile phone, or use it further away from the
Clavinova.
• The Master Volume is set too low; set it to an appropriate level using the [MASTER
VOLUME] control.
• Make sure a pair of headphones is not connected to the headphones jack.
• Make sure that Local Control (page 43) is ON.
The pedal cable/plug may not be properly connected. Make sure to securely insert the
pedal plug into the proper jack (page 53).
Troubleshooting
CLP-265GP Owner's Manual
51
Hide quick links:
Advertisement
Table of Contents
