Connections; Connectors - Yamaha Clavinova CLP-175 Owner's Manual

Connections

Connectors

CAUTION
Before connecting the Clavinova to other electronic components, turn off the power to all the components. Before
turning the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.
1
AUX PEDAL jack
A separately sold FC7 foot controller or FC4/FC5 foot switch can be con-
nected to this jack. By using an FC7 you can control the volume while playing
to add expression to your performance, or control various other functions. By
using an FC4/FC5, you can switch various selected functions on/off. To select
the function that will be controlled, use the [VOICE SETTING] parameter
[AuxPedal] (See page 86). The SONG [START/STOP] function can also be
assigned to a foot switch (See page 96).
2
MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch (described on the privious page)
to MIDI when you use these connectors.
3
HOST SELECT switch
This switch should be set according to the type of connected MIDI device or
personal computer. (Refer to "Connecting a personal computer" on page 63
for more information.)
4
TO HOST jack
This jack allows direct connection to a personal computer. (Refer to "Con-
necting a personal computer" on page 63 for more information.)
5
USB jack
This jack allows direct connection to a personal computer. (Refer to "Con-
necting a personal computer" on page 63 for more information.)
7
6
LEVEL FIXED
R L R L/L+R R
AUX OUT AUX IN
PC-2
MIDI
IN OUT THRU
AUX PEDAL MIDI
HOST SELECT
1 3
2
L/L+R
Mac
USB
USB
TO HOST
4 5
Connect or disconnect the
pedal when the power is off.
TIP
61
CLP-175