Yamaha Clavinova CLP-175 Owner's Manual page 74

Detailed Settings
4.
Write, execute, or save the data.
There are two ways to respond to the messages.
If "Execute? " or "Start? " appears:
Press the B [+(YES)] button to display confirmation ([Sure? ]). To
proceed, press the B [+(YES)] button again. The Clavinova displays
"Executing" and writes the data. When the operation is complete, it
displays "Completed" for three seconds, then returns to the previous
screen.
To cancel the operation, press the B [–(NO)] button instead of the B
[+(YES)] button.
If "Set? " appears:
Press the B [+(YES)] button to execute the setting. The Clavinova dis-
plays "Executing" and saves the data. When the operation is complete,
it displays "Completed" for three seconds, then returns to the previ-
ous screen.
However, the "Completed" display that appears when [Calibration]
(page 88) and [VoiceBulkDump] (page 92) is finished will not change
back to the previous display after three seconds. Press any button on
the panel to return to the previous display.
5.
Close the setting menu.
Press the [EXIT] button.
74
CLP-175
A
C
A
C
B
NO YES
D
B
NO YES
D