Setting The Octave [Octave]; Setting The Volume Level [Volume]; Setting The Position Of Right And Left Channels [Pan]; Make Fine Adjustments To The Pitch (Only In Dual Mode) [Detune] - Yamaha Clavinova CLP-175 Owner's Manual

Detailed settings for the voices [VOICE SETTING]
TIP
In Dual mode, parameters with the "*" mark are set for
Voice 1 and Voice 2 individually.
TIP
Parameter names enclosed in parentheses ( ) are dis-
played in Dual mode.

Setting the octave [Octave]*

The pitch of a note can be shifted upward or down-
ward in steps of an octave.
See the procedure on page 73.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
–2 (two octaves lower) - 0 (no pitch shift) - +2
(two octaves higher)
Setting the volume level
[Volume]*
You can set the volume level for each voice part.
See the procedure on page 73.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 and Voice 2)
Setting range:
0 - 127
80
CLP-175
Setting the position of right
and left channels [Pan]*
You can specify the position in the stereo image
from which you hear the sound.
See the procedure on page 73.
C
In Dual mode:
B
NO YES
D
C
B Setting range:
L64 (hard left) - C (center) - R63 (hard right)
NO YES
D
Make fine adjustments to the
pitch (only in Dual mode)
[Detune]
The pitch of the two sounds selected in Dual mode
can be "skewed" slightly away from each other.
See the procedure on page 73.
C
B
Setting range:
NO YES
–20–+20 (Positive (+) settings will raise the pitch
of the first sound and lower the pitch of the second
D
sound. Negative (–) settings will do the opposite.)
B
NO YES
D
A
A
Voice for editing (Voice 1 or Voice 2)
A
B
NO YES
D
B
NO YES
D
B
NO YES
D