Built-In Unit Opening Dimensions - Napoleon BIPRO825-3 Manual

22

BUILT-IN UNIT OPENING DIMENSIONS

EN
MODEL
BIPRO825
SIDE BURNER
N370-0504 -LPG
N370-0505 -NAT
WARNING!
!
serviced by a qualified installer to local codes.
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance.
Do not use wood or drywall.
!
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
ELECTRICAL OPENING
2" (51mm)
34" (864mm)
RECOMMENDED
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
!
WARNING!
MADE FROM NON-COMBUSTIBLE MATERIAL.
www.napoleon.com
OPENING DIMENSIONS
W D H
52 3/8" 20 5/8" 8 7/8"
1330mm 524mm 225mm
12 3/4" 16 1/2" 4 1/2"
324mm 419mm 114mm
This grill is designed for Non-combustible enclosures only, and must be installed and
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
OUTDOOR GFI ELECTRICAL
OUTLET RECOMMENDED -
LOCATE ON SAME SIDE OF
GRILL AS ROTISSERIE BRACKET.
H
CABINET FRAME, CABINET AND COUNTER TOP MUST BE
NOTES
OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
IF THE COUNTER TOP IS OVERHANGING THE EDGE OF
THE ENCLOSURE THE CORNERS MUST BE NOTCHED
A MINIMUM OF 1 3/16" (30 mm) TO ACCOMODATE
THE CONTROL PANEL END CAPS.
!
WARNING!
stored below the gas grill.
A propane tank can not be
N415-0543 JUL 17.20