Usb Reset - ATEN CS1922M User Manual

USB Reset

The USB Reset command allows you to reset the USB connection. The default
USB reset setting is off.
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
usbreset
Control
on
Enter
Enter
USB Reset Command
The available formula for the USB Reset command is as follows:
1. Command + Control + [Enter]
For example, to reset the USB connection, type the following:
usbreset on [Enter]
CS1922M / CS1924M RS-232 Commands
Description
USB Reset Command
Description
Enable USB reset connection
Description
Enter and send out command
13