Table of Contents
Advertisement
232 MBUX multimedia system
Ending a call
Select k.
#
Activating functions during a call
The following functions are available during a
call:
k
End Call
m
Microphone Off
_
Numeric Keypad
(show to send DTMF
tones)
h
Transfer to Phone
(an active call in hands-
free mode is transferred over to the tele‐
phone)
Select a function.
#
Putting an active call on hold
Tap on the contact or the call.
#
The call will be put on hold.
%
The call on hold can be ended any time or re-
activated by tapping again.
Conducting calls with several participants
Requirements:
There is an active call (
page 231).
/
R
Another call is being made.
R
Switching between calls
Select the contact.
#
The selected call is active. The other call is
on hold.
Activating a call on hold
Select the contact of the call on hold.
#
Ending an active call
Select k
End
Call.
#
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
Accepting/rejecting a waiting call
Requirements:
There is an active call (
page 231).
/
R
If you receive a call while already in a call, a
message is displayed.
Depending on the mobile phone and mobile net‐
work operator you will hear a call-waiting sound.
Select R Accept.
#
The incoming call is active.
The previous call is on hold.
Select k Reject.
#
%
This function and behavior depends on your
mobile phone network provider and the
mobile phone (see the manufacturer's oper‐
ating instructions).
Contacts
Information about the contacts menu
The contacts menu contains all contacts from
existing data sources, e.g. mobile phone.
You can store up to 3000 contacts.
From the contacts menu you can use telephone
functions such as calling a contact, for example
(
page 233).
/
If a mobile phone is connected to the multimedia
system (
page 229) and automatic calling up
/
(
page 233) is activated, the mobile phone's
/
contacts are displayed in the address book.
Hide quick links:
Advertisement
Table of Contents
