Mercedes-Benz A-Class 2020 Operator's Manual page 116

114 Light and visibility
High-beam headlamps
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the L
indicator lamp for low beam will be deactiva‐
ted and replaced by the K indicator lamp
for high beam.
To switch off: press the combination switch
#
in the direction of arrow 1 or pull in the
direction of arrow 3.
High-beam flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal lights
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal indicator will
flash three times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Activating/deactivating the hazard warning
lamps
Press button 1 .
#
The hazard warning lamps will switch on auto‐
matically if:
the airbag has been deployed.
R
Cornering light
Cornering light function
The cornering light improves the illumination of
the roadway over a wide angle in the turning
direction, enabling better visibility on tight
bends, for example. It can be activated only
when the low beam is switched on.