Automatic Transmission - Mercedes-Benz A-Class 2020 Operator's Manual

Press DYNAMIC SELECT switch
#
or backwards.
The drive program selected appears in the
multifunction display.
or
Press DYNAMIC SELECT button 2.
#
The DYNAMIC SELECT menu appears in the
multifunction display.
Press DYNAMIC SELECT button
#
The chosen drive program appears.
Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
© Settings
4 5
DYNAMIC SELECT
5
Setting drive program I
Select Individual
#
Select and set a category.
#
Restoring settings
Switch Request at Start
#
1 forwards
Function on: the next time the vehicle is started
a prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an addi‐
tional prompt appears asking if the function
should remain deactivated.
2 again. %
Function off: the next time the vehicle is star‐
ted the Comfort drive program is set automati‐
cally. The ECO start/stop function is activated
automatically.
Vehicle
5

Automatic transmission

DIRECT SELECT lever
Config..
Function of the DIRECT SELECT lever
& WARNING Risk of accident due to incor‐
on or off.
If the engine speed is higher than the idle
speed and you engage the transmission posi‐
tion h or k, the vehicle may accelerate
sharply.
#
Driving and parking 141
The prompt appears only if the previously
active settings deviate from the standard
settings.
rect gearshifting
If you engage the transmission position
h or k always depress the brake
pedal firmly and do not accelerate at
the same time.