Fluke Versiv Series Technical Reference Handbook page 542

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
module.
OptiFiber Pro OTDR results from End 2 and End 1. The
OTDR result can be from an Auto, Manual, SmartLoop, or
DataCenter OTDR test.
Averaged results from a bi-directional OTDR test.
FiberInspector results from End 2 and End 1.
FaultMap results from an OptiFiber Pro OTDR module.
Real Time Trace results from End 2 and End 1 from an
OptiFiber Pro OTDR module.
The scroll bar shows when the list of results is long. To use the

scroll bar, tap on the bar or slide your fingertip on the bar. For
example, to see the 12th result in the list, tap on "12" in the
scroll bar. When you slide your fingertip on the bar, the number
of the result you can see is next to your fingertip.
Tap the ID/Date control to sort the results by cable ID or by date.

When you sort by ID, the results show in ascending order. When
you sort by date, the latest result is at the top of the list.
 These icons show when you connect the tester to a network to
use Fluke Networks cloud services:
The tester is connected to a wireless network.
The tester is connected to a wired network.
See Chapter 18.
The asset management icon shows when the owner of a

LinkWare Live account has enabled the asset management
service for the tester. See "About the Asset Management
Service" on page 566.
506
Power meter results from a CertiFiber Pro OLTS