Client Configurations; Troubleshooting; Clients Can't Establish Connection - IBM Aspera HST Admin Manual

Values: 0 (default), 1, 2
rproxy_log_directory
The reverse proxy server log file location. If no value is set, the proxy logs to syslog.
Values: (Absolute path)

Client Configurations

General Syntax Guidelines
This collection of commands configures settings related to client transfers, which are transfers you initiate with ascp
on the command line or the GUI of your product.
The syntax for setting client parameters is the following:
# asconfigurator -x "set_client_data;parameter,value"
Note: Not all available parameters are listed below, only the most commonly used. To view a complete list, run the
following command:
# /opt/aspera/bin/asuserdata -+
Parameters and Values
transport_cipher
The encryption cipher to use for transfers.
Values: aes-128 (default), aes-192, aes-256, none
ssl_ciphers
The list of SSL encryption ciphers that the server will allow. Each cipher is separated by a colon (:).
See the server documentation for the default list of ciphers.
Values: (Colon-delimited list)
ssl_protocol
The minimum allowed SSL protocol. Higher security protocols are always allowed.
Values: tlsv1 (default), tlsv1.1, tlsv1.2
default_ssh_key
The path to the default SSH key that should be used in command line transfers.
Values: (Absolute path)

Troubleshooting

Solutions to common problems.

Clients Can't Establish Connection

Learn how to troubleshoot client issues with connecting to HST Server.
1. Test SSH ports and HTTP/HTTPS ports.
| Troubleshooting | 329