IBM Aspera HST Admin Manual page 49

Field
Outgoing Target Rate
Default (Kbps)
Outgoing Target Rate
Lock
Outgoing Minimum Rate
Cap (Kbps)
Outgoing Minimum Rate
Default
Outgoing Minimum Rate
Lock
Description
setting of unlimited applies no target
rate cap.
The default initial rate for outgoing
transfers, in kilobits per second. If allowed
("Outgoing Target Rate Lock" is set to
false), clients can modify this rate
in real time up to the "Outgoing Target
Rate Cap". This setting is not relevant to
transfers with a fixed bandwidth policy.
Lock the target rate of outgoing transfers
to the default value (set to true). Set to
false to allow users to adjust the transfer
rate of an outgoing transfer.
The highest minimum rate that an outgoing
transfer can request, in kilobits per second.
Client minimum rate requests that exceed
the minimum rate cap are ignored. The
default value of unlimited applies no
cap to the minimum rate.
Important: Aspera strongly recommends
setting the minimum rate cap to zero.
Transfers do not slow below the client's
requested minimum rate unless the
minimum rate is capped on the server. If
the client-requested minimum rate exceeds
network or storage capacity, this can
decrease transfer performance and cause
problems on the target storage.
The default initial minimum rate for
outgoing transfers, in kilobits per second.
If allowed ("Outgoing Minimum Rate
Lock" is set to false), clients can modify
the minimum rate in real time up to the
"Outgoing Minimum Rate Cap". This
setting is not relevant to transfers with a
fixed bandwidth policy.
Lock the minimum rate of outgoing
transfers to the default value (set to true).
Set to false to allow users to adjust
the minimum transfer rate. This setting
is not relevant to transfers with a fixed
bandwidth policy.
Important: Aspera strongly recommends
setting a lock on minimum rate to prevent
transfers from using minimum rates
that can overwhelm network or storage
capacity, decrease transfer performance,
and cause problems on the target storage.
| Configure the Server from the Command Line | 49
Values Default
positive integer 10000
true or false false
positive integer unlimited
positive integer 0
true or false false