IBM Aspera HST Admin Manual page 294

Option (short Option (long form)
form)
--source-prefix=prefix
--full-paths
--file-list=filename
--file-pair-list=filename
-v token
-t token
-k passphrase
-b
General Usage Examples
• Display the contents of the token:
# astokengen -t token [options]
• Authorize uploads to a specific destination:
# astokengen --mode=send [options] -u user --dest=path [-v token]
• Authorize uploads of one or more files as source/destination pairs to a specific destination:
# astokengen --mode=send [options] -u user --file-pair-list=filename --
dest=destination [-v token]
| Authentication and Authorization | 294
Description
Prepend the given path to each source path.
Store the entire path set in the token.
Note: This option is required when creating
tokens for A4 transfers.
Specifies a file name that contains a list of
sources for a download token. Each line of the
file contains a single source and blank lines are
ignored. For example:
/monday/first_thing.txt
/monday/next_thing.txt
/monday/last_thing.txt
Specifies a file name that contains a multiplexed
list of source and destination pairs for an upload
or download token. Each pair of lines encodes
one source and one destination and blank lines
are ignored. For example
/monday/first_thing.txt
/archive/monday/texts/
first_thing
/monday/next_thing.txt
/archive/monday/texts/
next_thing
/monday/last_thing.txt
/archive/monday/texts/
last_thing
Verify token against user and path parameters.
Display the contents of the token.
Passphrase to decrypt token. For use with -t.
Assume user name and paths are encoded in
base64.