IBM Aspera HST Admin Manual page 28

These commands create the following lines in aspera.conf. In the example, the docroot is /sandbox/
$(name). By using the substitutable string $(name) in the docroot, the application automatically replaces it
with the login user name.
<CONF version="2">
...
<default>
<authorization>
<transfer>
<in>
<value>allow</value>
</in>
<out>
<value>allow</value>
</out>
</transfer>
<token>
<encryption_key>fwierj283ru23jrszellr73rj2fnsk38ru28h3r3ashre</
encryption_key>
</token>
</authorization>
<file_system>
<access>
<paths>
<path>
<absolute>/sandbox/$(name)</absolute>
</path>
</paths>
</access>
</file_system>
...
</default>
</CONF>
To add the settings to aspera.conf manually, open it from the following directory:
/opt/aspera/etc/aspera.conf
2. Test the web UI with the client computer.
The client computer must be running a supported operating system and browser, as described in
page 13, and cookies must be enabled in the client's browser.
a) Go to the following address in the browser:
HTTP http://server_ip_or_name/aspera/user
HTTPS https://server_ip_or_name/aspera/user
b) The IBM Aspera Connect banner appears with a link to download and install the latest version of Connect:
| Set up the HST Server Web UI | 28
Requirements on