IBM Aspera HST Admin Manual page 278

asconfigurator option
aspera.conf setting
server_name
<server_name>
http_port
<http_port>
https_port
<https_port>
enable_http
<enable_http>
enable_https
<enable_https>
workers
<workers>
transfers_multi_session_default
<transfers_multi_session_default>
transfers_retry_duration
<transfers_retry_duration>
transfers_retry_all_failures
<transfers_retry_all_failures>
listen
<listen>
Description and Values
Hostname or IP address.
Default: hostname
HTTP service port. Value is an integer 1 -
65535, default 9091. This setting is overridden
by <listen>.
HTTPS service port. Value is an integer 1 -
65535, default 9092. This setting is overridden
by <listen>.
Enable HTTP for the Node API services by
setting to true. Default: false. This setting is
overridden by <listen>.
Enable HTTPS for the Node API services
by setting to true (default). This setting is
overridden by <listen>.
Number of worker threads. Default: 20.
Number of ascp workers per transfer. Default:
1.
If a transfer fails, node will try to restart it for
the specified time, default 20m. If a transfer
restarts and makes some progress, then the retry
timer is reset and the next time if fails, it will
again try to restart it for 'retry_duration'. The
backoff interval for retrying within this duration
is internal to the application, and the number
of retries may vary depending on the transfer
queue.
Setting to true will retry all transfers,
including transfers otherwise considered
unretriable. Default: false.
To bind asperanoded on a specific address
(or addresses), specify a comma-delimited
list of listening ports. Ports have the format
[ip_address:]port[s]. To specify a
secure port, add 's' to the end of the port number,
for example 127.0.0.1:9092s.
The IP address is optional; however, if no IP
address is specified then the port binds to all
network interfaces on the server, rather than to
the single address.
Setting this option overrides <http_port>,
<https_port>, <enable_http>, and
<enable_https>.
| Set up HST Server for Node API | 278
To Activate
Changes...
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded
Restart
asperanoded