IBM Aspera HST Admin Manual page 44

<target_queue>unset</target_queue> <!-- Outgoing Rate Control Target Queue -->
</network_rc>
</flow>
</bandwidth>
</out>
<encryption>
<allowed_cipher>any</allowed_cipher>
<fips_mode>false</fips_mode>
mode -->
<content_protection_required>false
</content_protection_required>
<content_protection_secret></content_protection_secret>
<content_protection_strong_pass_required>false
</content_protection_strong_pass_required>
Protection -->
</encryption>
<protocol_options>
<bind_ip_address></bind_ip_address>
<bind_udp_port>33001</bind_udp_port>
<disable_batching>false</disable_batching>
<batch_size>0</batch_size>
<datagram_size>0</datagram_size>
<max_sock_buffer>0</max_sock_buffer>
<min_sock_buffer>0</min_sock_buffer>
<rtt_autocorrect>true</rtt_autocorrect>
<rtt_reverse_infer>true</rtt_reverse_infer> <!-- Reverse path congestion inference -->
<chunk_size>0</chunk_size>
</protocol_options>
<validation_file_start>none</validation_file_start>
<validation_file_stop>none</validation_file_stop>
<validation_session_start>none</validation_session_start>
<validation_session_stop>none</validation_session_stop>
<validation_threshold>none</validation_threshold>
<validation_uri>AS_NULL</validation_uri>
<validation_threshold_kb>0</validation_threshold_kb>
<validation_threads>5</validation_threads>
<validation_lua_script_base64></validation_lua_script_base64>
<validation_lua_script_path></validation_lua_script_path>
</transfer>
3. Edit settings as needed.
Transfer Settings Reference
Field
Incoming Vlink ID
Incoming Target Rate
Cap (Kbps)
<!-- Encryption Allowed -->
<!-- Transfer in FIPS-140-2-certified encryption
<!-- Content Protection Required -->
<!-- Content Protection Secret -->
<!-- Strong Password Required for Content
Description
The ID of the vlink to apply to incoming
transfers. Vlinks are a way to define
aggregate transfer policies. For more
information, see .
The maximum target rate for incoming
transfers, in kilobits per second. No
transfer session can exceed this rate at any
time. If the client requests an initial rate
greater than the target rate cap, the transfer
proceeds at the target rate cap. The default
setting of unlimited applies no target
rate cap.
| Configure the Server from the Command Line | 44
<!–- Bind IP Address -->
<!-- Bind UDP Port -->
<!-- Disable Packet Batching -->
<!-- Batch Size -->
<!-- Datagram Size -->
<!-- Maximum Socket Buffer (bytes)-->
<!-- Minimum Socket Buffer (bytes)-->
<!-- RTT auto correction -->
<!-- Chunk Size -->
<!-- Validation File Start -->
<!-- Validation File Stop -->
<!-- Validation Session Start -->
<!-- Validation Session Stop -->
<!-- Validation Threshold -->
<!-- Validation URI -->
<!-- Validation Threshold KB -->
<!-- Validation Threads -->
<!-- Validation Lua Script Base64 -->
<!-- Validation Lua Script Path -->
Values
Vlink IDs
positive integer
Default
Undefined
(Disabled)
unlimited