Figure 25: Import Raw Data Parameters; Figure 26: Raw Data Imported - Grandstream Networks UCM6 Series Manual

•
Encoding to "Signed 16bit PCM"
•
Byte order to "No endianness"
•
Channels to "1 channel (Mono)"
•
Sample rate to "8000 Hz"
3. The result will be similar to the following figure:
Step 3: Measuring Cadence
Once the RX raw file is successfully imported, we can now measure ringing and silence duration that will
corresponds to cadence value (Cadence= Ringing duration/Silence duration).
Below is an example on how to measure silence and tone duration using the imported RX raw file.

Figure 25: Import Raw Data Parameters

Figure 26: Raw Data Imported

UCM6XXX Analog Trunks Guide
P a g e | 25