Advertisement
Quick Links
PPE Inspection
Inspection procedure
• In addition to routine checks for each use, PPE should regularly undergo a detailed inspection by a competent
person. Petzl recommends an inspection every 12 months and after any exceptional event in the life of the product.
• PPE inspection should be conducted with the manufacturer's Instructions for Use.
Download the instructions at PETZL.COM.
3. Inspecting the pair of crampons
• Verify that the pair of crampons is made up of one left foot and one right foot of the same
model, with the same accessories.
L
=
R
• Verify that the front and rear parts and the accessories are
compatible with each other (see the Instructions for Use for
your crampons).
PPE INSPECTION - Inspection procedure - Crampons (110416)
CRAMPONS AND CORD-TEC CRAMPONS
1. Known product history
Any PPE showing unexpected degradation should be quarantined, pending a detailed inspection.
The user should:
- Provide precise information on the usage conditions.
- Report any exceptional event regarding his PPE.
(Examples: fall or fall arrest, use or storage at extreme temperatures, modification outside manufacturer's
facilities...).
2. Preliminary observations
Verify the presence and legibility of the serial number and the CE mark.
Attention, the serial number code on our products is evolving. Two types of code will coexist.
See below for details on each serial number code.
Code A:
Year of manufacture
Day of manufacture
Name of Inspector
Incrementation
Verify that the product lifetime has not been exceeded.
Compare with a new product to verify there are no modifications or missing parts.
Crampon accessories/spare
parts
Code B:
00 000 AA 0000
L
=
R
PETZL.COM
00 A 0000000 000
Year of manufacture
Month of manufacture
Batch number
Incrementation
1/4
Advertisement
Related Manuals for Petzl LYNX T24A LLU
Summary of Contents for Petzl LYNX T24A LLU
- Page 1 • In addition to routine checks for each use, PPE should regularly undergo a detailed inspection by a competent person. Petzl recommends an inspection every 12 months and after any exceptional event in the life of the product. • PPE inspection should be conducted with the manufacturer's Instructions for Use.
- Page 2 4. Inspecting the front and rear parts • Check the condition of the metal parts on the whole frame (wear, • On the LYNX crampon, check that the removable front points cracks, deformation, corrosion...). are properly tightened and in good condition. See your crampons' Instructions for Use for inspecting the installation of the points, screws, nuts and spacers according to your chosen configuration for the front points.
- Page 3 6. Checking the antibott system • Check the condition of the front and rear ANTISNOW (wear, cracks, deformation...) and the screws attaching them to the crampon. If necessary, replace the ANTISNOW with new spare parts. 7. Checking the binding system •...
- Page 4 NOTICE NOTICE picto “V” ou “X” combiné à l’action à mener picto “V” ou “X” combiné à l’action à mener Petzl Petzl Petzl Petzl • Worn point • Cracked frame • Damaged ANTISNOW •...