Yamaha CLAVINOVA C L P - 3 8 Owner's Manual page 119

4.
Attach A.
4-1
Adjust the position of A so that the left and right
ends of A will project beyond E and F equally (as
seen from the rear).
4-2
Secure A using two 6 x 16mm short screws from
the rear.
4-3
Secure A using four 6 x 16mm short screws from
the front.
4-1
4-2
4-4
Firmly tighten the screws from the upper parts
you temporarily fastened in step 2-4 above
(assembly B).
B
4-4
5.
Connect the speaker cord.
5-1
Remove the twist tie attaching the speaker cord.
5-2
Insert the speaker cord plug into the connector so
that the tab extends toward the front when viewed
from the rear.
5-2
6.
Connect the pedal cord.
6-1
Insert the pedal cord plug into the [PEDAL]
connector.
6-2
Attach the cord holders to the instrument, then
clip the cord into the holders. At this time, be
4-3
careful that the pedal cord isn't loose between the
plug and cord holder.
6-3
Use a twist tie to bundle the pedal cord.
6-3
Keyboard Stand Assembly
6-1
6-2
CLP-380 Owner's Manual
119