Loading the Internet Setting Files
This procedure lets you make Internet settings by loading the files created on the special
Yamaha webpage to the instrument.
2
2.
Call up the Internet Settings screen.
Hold down the [FILE/SONG SETTING] button, and press the [REC]
button.
Internet Settings screen
A
C
3.
Engage the Load mode.
Make sure that the USB storage device containing the saved Internet
setting file named "config.n21" is connected to the instrument, and then
use the A [–][+] buttons.
A
C
4.
Start loading.
Press the B [+ (YES)] button to call up the confirmation message
("Sure?-->").
A
C
To proceed, press the B [+ (YES)] button again. An "Executing" message appears
and data loading starts. When loading is complete, a "Completed" message
appears for three seconds, followed by the Check the Connection screen. Please
proceed to "Checking the Connection" on page 60.
To cancel the loading, press the B [– (NO)] button instead of the B [+ (YES)]
button.
3
2
Wireless
Execute?-->
NetworkSearch
ConfigFile
Execute?-->
Import
ConfigFile
Sure?-->
Import
Internet Direct Connection (IDC)
4
B
NO
YES
D
You can create the Internet setting
files (named "config.n21") on the
special Yamaha webpage.
B
Yamaha recommends that you
NO
YES
back up the Internet setting files
(page 103).
D
B
NO
YES
D
CLP-380 Owner's Manual
TIP
TIP
59