Internet Direct Connection (IDC)
Exporting the Connection Information
This procedure lets you export the detailed information on the current connection as a text file to a USB flash storage
device. You can check the information on your computer.
Procedure
1.
Call up the screen below.
Hold down the [FILE/SONG SETTING] button, and press the [REC]
button.
A
C
2.
Turn on the Export mode.
Make sure that a USB flash storage device is connected to the
instrument, and then press the A [–][+] button.
A
C
If the "Export" does not appear in the lower left of the screen, press the C [–][+]
buttons to call up "Export."
3.
Start exporting.
Press the B [+ (YES)] button.
Overwriting the Connection Information
A "Overwrite?-->" message will appear on the display if a USB storage device
contains a file with the same name as the one you exported before. To overwrite,
press the B [+ (YES)] button again. An "Executing" message appears and the
Clavinova overwrites the data. When overwriting is complete, a "Completed"
message appears for three seconds, before returning to the previous screen.
To cancel overwriting, press the B [– (NO)] button instead of the B [+ (YES)]
button.
62
CLP-380 Owner's Manual
2
1
1
Wireless
Execute?-->
NetworkSearch
ConnectInf
Execute?-->
Export
3
The connection information file
does not allow you to manually
make Internet settings (pages 53
and 57). The connection
information file is set to "read only"
and cannot be edited.
B
NO
YES
D
B
NO
YES
D
TIP