Adjusting the low-range gain (amount
of boost/cut) of the equalizer*
[EQ LowGain]
See the procedure on page 80.
A
Main
EQ LowGain
C
Setting range:
-12 – +12 dB
Adjusting the high-range frequency of
the equalizer*
[EQ HighFreq. (EQ H.Freq)]
See the procedure on page 80.
A
Main
EQ HighFreq.
C
Setting range:
500 Hz – 16.0 kHz
Adjusting the high-range gain
(amount of boost/cut) of the
equalizer*
[EQ HighGain]
See the procedure on page 80.
A
Main
EQ HighGain
C
Setting range:
-12 – +12 dB
B
Set?-->
NO
YES
0
D
B
Set?-->
NO
YES
500
D
B
Set?-->
NO
YES
0
D
Detailed settings for the voices [VOICE SETTING]
Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner and
degree to which the volume level changes in response to
your touch on the keyboard (how hard you play). Since
the volume level of the harpsichords and pipe organs do
not change regardless of how you play the keyboard, the
normal setting for these voices is 127. (See the setting
range below.)
See the procedure on page 80.
A
Main
TouchSense
C
In Dual mode:
A
MainxLayer
TouchSense(GrndPno1) 64
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 (softest) – 64 (largest changes in the level) – 127 (loudest and
fixed)
B
Set?-->
NO
YES
64
D
B
Set?-->
NO
YES
D
91
CLP-380 Owner's Manual