Commissioning; Factory Setting - Becker Centronic SunWindControl SWC745-II Assembly And Operation Instructions Manual

The set wind strength is indicated on the display. The value to be set
flashes.
If the wind strength is lower than set for 15 mins, drive commands
can be executed again.
TEST mode
The TEST mode is activated by adjusting a threshold value. This
ends automatically after approx. 15 minutes or as soon as the slide
switch is activated. In TEST mode, the shade function and wind mon‐
itoring times are shortened.
Language selection (ENGLISH)
Here you can select your own language.
SUMMER/WINTER
SUMMER/WINTER denotes the automatic summer/winter time ad‐
justment. Factory setting is ON; the unit adapts automatically.
Function menu
This mode is only intended for trained, specialist personnel.
In the FUNCTION menu you can set the following functions:
▪ AWNING/VENETIAN BLIND (Selection of the shading solution)
▪ PROGRAM MODE
▪ RUNNING TIME
▪ SHADE TIME/AUTO SHADE TIME
▪ EXPERT MODE OFF/ON
▪ INITIAL OPERATION (for service purposes)
EXPERT MODE
In order to change delay times in the SETTINGS menu, EXPERT
MODE must be set to ON.

Commissioning

You "wake up" the SWC745-II the first time you press button. Now
you can choose the language with the +/- buttons and adopt this by
pressing OK. The SWC745-II is in Automatic mode.

Factory setting

TIME/DATE
47