Setting Up The Crw2100Sx Drive - Yamaha CRW2100SX Series Owner's Manual

Setting Up The CRW2100SX Drive

There are three stages to setting up your CRW2100SX drive.
Installing a SCSI card
You will need to open the casing of your computer and insert a SCSI card
(sold separately) if one has not been installed already.
n You will need a Phillips screwdriver to open the casing of the computer and to
secure the SCSI card in its slot.
n For details about how to install the SCSI card, refer to the documentation that came
with it and your computer.
Connecting the drive
You will need to connect your CRW2100SX drive to your computer' s SCSI
card using a SCSI cable. You will also need to connect the included power
cable between the drive and an electrical outlet.
Verifying the Hardware Installation
Before you can begin using your CRW2100SX drive, you need to verify that it
has been installed and recognized correctly.
Setup Procedures
14