Macintosh Users - Yamaha CRW2100SX Series Owner's Manual

Macintosh Users

STEP Does your Macintosh have
1
a built-in SCSI connector?
STEP Set up the CRW2100SX drive
2
1. Set the switches at the rear of the drive.
(P.12, 13)
2. Connect the SCSI and power cables,
then switch the drive on. (P.18-20)
STEP Check that the CRW2100SX
3
drive is recognized correctly
Use the Apple System Profiler and check
that the drive is recognized correctly.
STEP Install the CD writing
4
software
For details about how to install the
software, refer to the documentation
that came with it.
STEP Start using the CRW2100SX
5
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
NO
YES
Setup Flowchart
STEP
Purchase a SCSI card
1-1
Recommended model:
Adaptec PowerDomain 2930U (PCI)
Install the SCSI card
STEP
1-2
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
10