Setup Procedures; Serial Number; Scsi Settings - Yamaha CRW2100SX Series Owner's Manual

Setup Procedures

Serial Number

Once you have taken the CRW2100SX drive out of its packaging, you should
immediately note down the serial number found at the rear of the drive under the
bar code. You may need to refer to this number when requesting Customer
Support services. In the box below the following diagram, write down the 10-
character serial number (consisting of 3 letters followed by 7 digits).
Serial No.

SCSI Settings

Before connecting your CRW2100SX drive to your computer, you need to set up
the drive using the switches located at the rear of the unit. You'll need to set the
following:
SCSI ID number
Termination
11
Serial number
(3 letters and 7 digits)