Setup Flowchart - Yamaha CRW3200EZ Owner's Manual

Setup Flowchart

This flowchart shows the procedure for setting up the CRW8424S drive. For
easy cross-referencing, the relevant pages in this manual are also given.
STEP
Do you have a SCSI adapter
1
card?
Check that the SCSI adapter
STEP
2 card is recognized correctly
Go to Control Panel | System | Device
Manager tab. Double-click on SCSI
controllers to check that the adapter card is
recognized correctly by the computer's OS.
Set up the CRW8424S drive
STEP
3
1. Set the jumper switches (P.10)
2. Fit the drive into the computer
Tower-type case (P.14)
As additional or replacement drive
Desktop-type case (P.22)
As a replacement drive
Check that the CRW8424S
STEP
4 drive is recognized correctly
Go to Control Panel | System | Device
Manager tab. Double-click on CDROM
to check that the drive is recognized
correctly by the computer's OS.
Install the CD writing software
STEP
5
For details about how to install the
software, refer to the documentation
that came with it.
Start using the CRW8424S
STEP
drive!
6
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
NO
YES
1
STEP
Obtain a SCSI adapter card
1-1
Recommended models:
Adaptec AHA-2940-series (PCI)
Install the SCSI adapter card
STEP
1-2
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.