Tape Programming - Yamaha RL RX-E100 Owner's Manual

ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM

TAPE Programming

By specifying the length of the tape, the CD player,
CDX-E100 programs tracks or helps you to program
tracks so they will fit onto the tape with the least amount
of unrecorded space remaining at each end of the tape.
There are three ways of programming.
1 Manual TAPE programming
A
REP
RNDM
D
MD REC
DUBBING
MODE
1
Insert the desired disc into the CD player, and load a
blank tape into the KX-E100.
2
Press TAPE repeatedly to select the length of tape to
be used. Each time you press TAPE, the length of the
tape changes as follows:
46
• You can use numeric buttons to input the length of the
tape.
E-22
SLEEP DISP
TIME
C
PROG
REP PROG
B
RNDM
E
TAPE
PEAK TAPE
VOLUME
TAPE
MD AUX CD
TUNER
PRESET
TAPE REC
TAPE
DUBBING
MODE START
DUBBING
START
54
90 60
3
Press PROG to start programming.
• "A B" appears in the display to indicate the direction
of the tape.
4
Select the desired track number using numeric
buttons.
• Repeat step 4 to continue programming tracks.
• The remaining time is shown on the display. If the track is
longer than the remaining time, "Error" appears on the
display.
5
Press TAPE to continue programming tracks on side
B.
• Repeat step 4.
6
Press PROG to confirm the program.
7
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
2 Automatic TAPE programming
1
Repeat steps 1 and 2 of "Manual TAPE
programming".
2
Press REP to start programming.
• Programming is done in the order on the CD from side A
to side B. When complete, the programmed track number
and total time are indicated in the display for 3 seconds.
3
Press PROG to confirm the program.
4
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.
3 Random TAPE programming
1
Repeat steps 1 and 2 of "Manual TAPE
programming".
2
Press RNDM to start programming.
• Programming of CD tracks is done randomly from side A
to side B. When complete, the programmed track number
and total time are indicated in the display for 3 seconds.
3
Press PROG to confirm the program.
4
Choose CD = TAPE by pressing DUBBING
MODE, and press DUBBING START to start
recording.