Yamaha CDX-396 Manual

Yamaha CDX-396 Manual

2hz-20khz
Hide thumbs Also See for CDX-396:

Advertisement

CDX-396/496
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact
the distributor's Service Division.
WARNING:
IMPORTANT:
CONTENTS
TO SERVICE PERSONNEL ....................................... 1-2
FRONT PANELS ............................................................ 3
REAR PANELS .............................................................. 4
SPECIFICATIONS .......................................................... 5
INTERNAL VIEW ........................................................... 5
DISASSEMBLY PROCEDURES ............................... 6, 7
STANDARD OPERATION CHART ........................... 7, 8
TEST MODE ............................................................... 8, 9
ERROR MESSAGE ................................................ 10, 11
1 0 0 7 0 7
COMPACT DISC PLAYER
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that all service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-
lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
DISPLAY DATA ........................................................... 12
IC DATA .................................................................. 13-16
BLOCK DIAGRAM ....................................................... 17
PRINTED CIRCUIT BOARD ................................... 18-21
IC BLOCK .................................................................... 22
WAVEFORMS .............................................................. 23
SCHEMATIC DIAGRAM .............................................. 24
PARTS LIST ............................................................ 25-37
REMOTE CONTROL TRANSMITTER ......................... 38
CDX-396/496

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha CDX-396

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    CDX-396/496 TO SERVICE PERSONNEL 1. Critical Components Information. Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only). When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits.
  • Page 3 CDX-396/496 G, B models CLASS 1 LASER PRODUCT R, G, B model English THIS PRINTING (SEE POSITION SHOWN IN THE ILLUSTRATION) INFORMS THE USER THAT THE APPARATUS CONTAINS A LASER COMPONENT. THIS LABEL (SEE POSITION SHOWN IN THE ILLUSTRATION) WARNS THAT ANY FURTHER PROCEDURE WILL BRING THE USER INTO EXPOSURE WITH THE LASER BEAM.
  • Page 4: Front Panels

    CDX-396/496 FRONT PANELS CDX-396 CDX-496 CDX-496 CDX-396 OUTPUT LEVEL...
  • Page 5: Rear Panels

    CDX-396/496 REAR PANELS U, C models R model A model G, B models...
  • Page 6: Specifications

    Dynamic Range 95dB Harmonic Distortion+Noise (1kHz) 0.003% Frequency Response 2Hz — 20kHz ±0.5dB Power Requirements U, C models (CDX-396 ONLY) 120V AC 60Hz B, G models 230V AC 50Hz A model (CDX-396 ONLY) 240V AC 50Hz R model 110/120/220/240V AC 50/60Hz...
  • Page 7: Disassembly Procedures

    CDX-396/496 DISASSEMBLY PROCEDURES (Remove parts in disassembly order as numbered.) 1. Removal of Top Cover Top Cover a. Remove 4 screws ( 1 ) and 3 screws ( 2 ) in Fig. 1. b. Lift the Top Cover at the rear and move it rear-ward.
  • Page 8: Standard Operation Chart

    CDX-396/496 Pick-up Head Gear A Check that the disc table height is as specified below. Disc Table Sled Shaft 19.4 ± 0.2mm Fig. 5 Stopper STANDARD OPERATION CHART POWER ON If a disc is not loaded, "0:00" appears in the time indicator.
  • Page 9: Test Mode

    CDX-396/496 Tracking gain rough ADJ Tracking balance ADJ (only tray OPEN/CLOSE) Focus balance ADJ Focus gain ADJ Tracking gain ADJ * TOC READ - * Data f etch cycle - TRACK NO. 1 is searched. After searching the beginning, PLAY starts.
  • Page 10 CDX-396/496 (2) Shown below are the panel key and remote control transmitter functions in the TEST mode. Function List of Panel keys Note) "Traverse servo" means the same as "feed servo". PANEL KEY FUNCTION OPEN/CLOSE Tray open/close. FOON, TRON, SPON, TVON(FEON).
  • Page 11: Error Message

    CDX-396/496 ERROR MESSAGE (1) When operation is terminated in an abnormal condition (stop or open), pressing STOP on the remote control while pressing STOP on the panel will set to the error message display enable mode. (2) Shown below is an example of display. ("E-73" as an example) (3) This function stays effective till the power is turned OFF.
  • Page 12 CDX-396/496 c) Operates as if no disc loaded. (although loaded) 2) Troubleshooting from System Malfunctions a) Tray fails to come out/go in. Does tray Poor tray loading. load properly? Poor mechanism Tray starts to operation. move but stops. Wire caught.
  • Page 13: Display Data

    CDX-396/496 DISPLAY DATA V401 : 9-MT-133GK PATTERN AREA PIN CONNECTION PIN NO. CONNECTION PIN NO. CONNECTION NOTE 1) F1, F2 ..Filament 2) NP ....No pin 3) NC ....No connection 4) P1~P10 ..Datum Line 5) 1G~9G ..Grid...
  • Page 14: Ic Data

    CDX-396/496 IC DATA IC3 : MN35511AL Signal Processor Controller (SPC) & D/A Converter 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 VCOF2 LDON AVSS1 OUT1C /RFDET OUT1D TRCRS...
  • Page 15 CDX-396/496 r e f e r r a t i a f r s a i r o f o l c l i f r e t r o f l i f r e t r o f...
  • Page 16 CDX-396/496 IC300 : uPD78043FGF-072 System Control P94/FIP6 P114/FIP22 P93/FIP5 P115/FIP23 P92/FIP4 P116/FIP24 P91/FIP3 P117/FIP25 P90/FIP2 P120/FIP26 P81/FIP1 P121/FIP27 P80/FIP0 P122/FIP28 P123/FIP29 P27/SCK0 P124/FIP30 P26/SO0/SB1 P125/FIP31 P25/SI0/SB0 P126/FIP32 P24/BUSY P127/FIP33 P23/STB P22/SCK1 P21/SO1 P20/SI1 RESET P00/INTP0/TI0 P01/INTP1 P02/INTP2 P17/ANI7 P03/INTP3/CI0 P16/ANI6...
  • Page 17 CDX-396/496 I F / I F / o l c I F / r e f I F / d i r s l a N I / t i w I F / N I / o l c...
  • Page 19: Printed Circuit Board

    PRINTED CIRCUIT BOARD (Foil side) MAIN P.C.B.(1) OPTICAL PICK-UP KSM-213CCM W210 To : MAIN (3) #301 To : MAIN (2) • Semiconductor Location Ref. No. Location D100 D101 D200 D201 D202 IC300 D203 D204 D205 D206 40 41 D207 D208 D209 DIGITAL AUDIO OUT...
  • Page 20 (PLAY) CDX-496 ONLY CDX-496 ONLY OUTPUT LEVEL CDX-496 ONLY SKIP/ SEARCH SW418 SW417 SW415 SW315 SW406 7/10 +10/3 CDX-396 ONLY STOP/SEARCH CDX-396 ONLY MAIN P.C.B.(6) MAIN P.C.B.(4) CDX-496 ONLY MAIN P.C.B.(5) W100 To : MAIN (1) W200 120V 220V PHONES...
  • Page 21: Ic Block

    CDX-396/496 IC BLOCK IC1 : AN8882SB IC2 : AN8785SB Digital Servo Head Amp PU Driver ENV DET Amp. RF-A GC EQCTL CBDO Thermal RFDET Protection Amp. COFTR Circuit OFTR Standby OFTR Amp. Band gap FEOUT Reset Circuit Amp. V REF2 V REF2 1.25V...
  • Page 22: Waveforms

    CDX-396/496 WAVEFORMS Point A (EFM : Pin10 of IC1) Point B (Pin59 of IC3) V : 0.2V/div H : 0.5 usec/div V : 1V/div H : 50 nsec/div AC range 1 : 1 probe DC range 1 : 1 probe...
  • Page 23: Schematic Diagram

    SCHEMATIC DIAGRAM LINE AMP & LPF MUTING -5.7 -5.0 -5.0 LINE -5.0 -5.0 -5.7 SPC & DAC DIGITAL SERVO CDX—496 ONLY HEAD AMP HEADPHONE 10.0 PHONES -10.5 -10.9 -11.5 EEPROM POWER SUPPLY 10.1 10.2 -0.2 DIGITAL CDX—496 ONLY 10.2 -0.2 AUDIO OUT OPTICAL PU DRIVER...
  • Page 24: Parts List

    CDX-396/496 P ARTS LIST WARNING Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ELECTRICAL PARTS Carbon resistors (1/6W or 1/4W) are not included in the ELECTRICAL PARTS List. For the part Nos. of the carbon resistors, refer to the last page.
  • Page 25 CDX-396/496 CDX-396 MAIN P.C.B. Schm Schm Ref. PART NO. Description Ref. PART NO. Description V5003700 P.C.B. MAIN(UC) VA761400 C.CE 47pF V5003800 P.C.B. MAIN(R) VA761400 C.CE 47pF V5003900 P.C.B. MAIN(A) UR866100 C.EL V5004000 P.C.B. MAIN(BG) UR866100 C.EL V2731000 CN.FMN UR866100 C.EL VB390200 CN.BS.PIN...
  • Page 26 CDX-396/496 CDX-396 MAIN P.C.B. Schm Schm Ref. PART NO. Description Ref. PART NO. Description Q203 VS883400 TR 2SD2394 E,F C222 VS741700 C.CE.SAFTY 0.01uF 275V Q204 iA093320 TR 2SA933S Q,R C300 VJ599100 C.CE.TUBLR 0.1uF Q250 iA093320 TR 2SA933S Q,R C301 UR818100 C.EL 100uF 6.3V...
  • Page 27 CDX-396/496 CDX-496 MAIN P.C.B. Schm Schm Ref. PART NO. Description Ref. PART NO. Description V5004200 P.C.B. MAIN(R) VA761400 C.CE 47pF V5004300 P.C.B. MAIN(BG) VA761400 C.CE 47pF V2731000 CN.FMN UR866100 C.EL VB390200 CN.BS.PIN UR866100 C.EL VB390100 CN.BS.PIN UR866100 C.EL CB100 VK024700 CN.BS.PIN UR866100 C.EL...
  • Page 28 CDX-396/496 CDX-496 MAIN P.C.B. Schm Schm Ref. PART NO. Description Ref. PART NO. Description IC301 XS070A00 IC S-24C01ADP EEPROM C214 UR866470 C.EL 4.7uF JK100 V2700900 JACK.PHONE JY-6317-03-030GD C215 FG644100 C.CE 0.01uF L201 VV900900 FLTR 3071-012-0 C216 FG644100 C.CE 0.01uF * PJ100 V4925200 JACK.PIN C217 UR867470 C.EL...
  • Page 29 CDX-396/496 CDX-396 EXPLODED VIEW R model only 200-1 1-40 1-23 1-31 1-40 1-40 1-20 1-25 1-40 1-26 1-27 1-22...
  • Page 30 CDX-396 MECHANICAL PARTS Ref. PART NO. Description Remarks Markets MF130100 FLEXIBLE FLAT CABLE 30P 100mm * 1-20 V4200600 FRONT PANEL * 1-20 V4200700 FRONT PANEL * 1-22 V4210400 WINDOW PANEL,LID 1-23 VZ494400 BUTTON 11x22 1-23 VZ494500 BUTTON 11x22 * 1-25...
  • Page 31 CDX-396/496 CDX-396 Ref. PART NO. Description Remarks Markets V2128100 PW HEAD S-TITE SCREW 3x12-8 MFZN2-Y VT669300 PW HEAD B-TITE SCREW 3x8-8 MFC2 ACCESSORIES * 200 V4925800 REMOTE CONTROL TRANSMITTER * 200-1 AAX13340 LID BLJYE 60050001 VS381600 PIN-PLUG CORD 2P 1.0m...
  • Page 32 CDX-396/496 CDX-396/496 CDX-496 EXPLODED VIEW R model only 200-1 2 (4) 1-40 1-23 1-40 1-21 1-20 1-31 1-40 1-40 1-22...
  • Page 33 CDX-496 MECHANICAL PARTS Ref. PART NO. Description Remarks Markets MF130100 FLEXIBLE FLAT CABLE 100mm * 1-20 V4241800 FRONT PANEL * 1-20 V4241900 FRONT PANEL * 1-21 V4211000 PANEL,SUB * 1-21 V4211100 PANEL,SUB * 1-22 V4316800 WINDOW PANEL,LID 1-23 VZ494400 BUTTON 11x22 1-23 VZ494500 BUTTON...
  • Page 34 COMMON EXPLODED VIEW (CD Mechanism Unit) Stopper * The stopper is not supplied with the tray as a spare part. When replacing the tray, keep the removed stopper and reuse it. Should it be lost and a new one be necessary, order service part Main Chassis (S) and remove the stopper only from it and use it as a spare part.
  • Page 35 CDX-396/496 COMMON MECHANICAL PARTS (CD Mechanism Unit) Ref. PART NO. Description Remarks Markets VZ573200 CD MECHANISM UNIT KSL-2130CCM CX680620 TRAY (C) 2130 264629001 CX675250 GEAR COVER (S) 262554401 CX675210 TRAY GEAR (S) 262553501 AX619150 CHUCKING PLATE (S) 262554601 EX602890 BW HEAD P-TITE SCREW 2.6x7...
  • Page 36 COMMON CDX-396/496 EXPLODED VIEW (Drive Unit) Ref. PART NO. Description Remarks Markets NX635420 MOTOR CHASSIS ASS'Y (MB) X26258771 CX679710 MOTOR GEAR ASS'Y X26257691 AX623980 SLED SHAFT 262690801 CX679720 GEAR, A 262690701 EA020036 PAN HEAD SCREW ZMC2-Y 762125515 KX604660 LEAF SWITCH...
  • Page 37: Remote Control Transmitter

    COMMON CDX-396/496 REMOTE CONTROL TRANSMITTER SCHEMATIC DIAGRAM U1 PT247—001 IR—LED 200K R2 180 2SD1781K 47uF/10V OSCO OSCI 3.64MHz CDX-396 CDX-496 CUSTOM CODE DATA CODE KEY No. FUNCTION (HEX) (HEX) REPEAT OPEN/CLOSE CLEAR STOP PLAY TIME OUTPUT LEVEL SEARCH >> OUTPUT LEVEL-...
  • Page 38 CDX-396/496 Parts List for Carbon Resistors 1/4W Type Part No. 1/6W Type Part No. 1/6W Type Part No. Value Value 1/4W Type Part No. 3100 3100 10 k 7100 7100 HJ35 HF85 HF45 HF45 3180 7110 11 k 7110 HJ35...

This manual is also suitable for:

Cdx-496

Table of Contents