Connecting The System; Rx-E100 - Yamaha RL RX-E100 Owner's Manual

Connecting RX-E100 and CDX-E100
1
Connect ‰ to ‰ using the RCA pin cable.
Insert the plugs into the jacks of the same colour.
2
Connect RX-E100 and CDX-E100 with the system control cable.
The other SYSTEM CONNECTOR of CDX-E100 is for connecting MDX-E100 or KX-E100.
3
Connect the AC power plug of CDX-E100 to AC OUTLET of RX-E100.
1
RCA pin cable
Adding KX-E100 and MDX-E100 to the above system
supplied with the respective component.)
1
Connect Å and ı of RX-E100 to Å and ı of KX-E100.
2
Connect Ç and Î of RX-E100 to Ç and Î of MDX-E100.
3
Connect an external component to the AUX terminal of RX-E100.
4
Connect DIGITAL OPTICAL OUT of CDX-E100 to DIGITAL OPTICAL IN of MDX-E100.
Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL
IN jack before making digital connections. Be sure to replace the terminal's cover when the terminal on the rear panel
is not being used, in order to protect from dust.
5
AC OUTLET (CDX-E100)
Connect the AC power plug of MDX-E100 or KX-E100 (Except for the UK model).

Connecting the system

ANALOG DIGITAL
OPTICAL
E OUT
L
OUT
R
75 UNBAL
FREQUENCY
FM ANT GND AM ANT
STEP
B A E
R L
L
TAPE CD
R
OUT IN IN
L
MD AUX
R
6 MIN./SPEAKER
D C
SPEAKERS
3
SYSTEM
CONNECTOR
System control cable
SUBWOOFER SYSTEM
CONNETOR
OUT
(For details, refer to the owner's manual
GETTING STARTED
<CDX-E100>
To RX-E100
<RX-E100>
2
To wall outlet
E-5