Safety Warning - Emos P5507- FE-5 Manual

1.1 "1" marks the number of the programme
group (groups of programmes are num-
bered from 1 to 10).
1.2 "ON" means activated.
1.3 "OFF" means deactivated.
2. To select the programme group and the on/
off option, push the TIMER button to choose a
higher group number, whereas the sequence
is as follows:
1ON1OFF2ON2OFF . . . 10ON10OFF
Real time will show automatically after 15 s
of inactivity in the settings or if you push the
CLOCK button.
3. After choosing the programme (1–10) you can
set the day of the week and the time. Push
WEEK to choose the day or a block of days in
a week. The abbreviations of days/blocks are
displayed in the following order:
3.1 MO TU WE TH FR SA SU
3.2 MOTUWETHFRSASU
3.3 MO TU WE TH FR
3.4 SA SU
3.5 MO TU WE TH FR SA
3.6 MO WE FR
3.7 TU TH SA
3.8 MO TU WE
3.9 TH FR SA
3.10 MO WE FR SU
4. To set the time of the programme, the LCD
must be showing the "PROGRAM" text.
4.1 To set the time of the start (turn on) the
programme (1ON) push the HOUR button
briefly and the hours will start changing
slowly. If you hold this button, hours will
change fast. Release the button as soon
as the desired hour appears on screen.
4.2 To set the minutes of the programme
start (1ON), push the MINUTE button
and the time will start changing slowly.
If you hold the button, time changes
fast. Release the button as soon as the
desired minute value appears on screen.
4.3 To set the programme end (turn off )
(1OFF) push the TIMER button and
proceed the same way as described in
points 4.1 and 4.2
Note:
(a) If you want to adjust a pre-set programme, proceed
like in points 4 to 4.3 in part F and enter new data to
replace the original setting.
(b) After setting the programme, push CLOCK to return
to the real time display. If you do not do so, the time
will automatically show after 15 seconds of inactivity.
G. Random
1. The Random function turns the appliance on
and off irregularly every 10 to 31 minutes from
18:00 to 6:00.
2. Plug the switch to the electric socket and
use the ON/AUTO/OFF button to set the
programme to the AUTO mode, so you can
start/end the Random function.
3. Push the RANDOM button and the right part of
LCD will display an "R" symbol to indicate the
random turn off/on function is activated. For
10–31 minutes the power supply is off. After
this time the function switches to an opposite
mode, so it turns on.
4. By repeated pushing of the RANDOM button you
can suspend the function of random turning on/
off and the "R" sign will disappear from the display.
H. Cancelling/restoring a pre-set
programme
When you push ON/AUTO/OFF , you can cancel/
restore a pre-set programme, so the display will
change in the following order:
1. "ON" cancelling a pre-set programme, so the
appliance will remain on all the time.
2. "AUTO" restoring a pre-set programme, so the
appliance will go turning on and off automat-
ically according to the settings.
3. "OFF" cancelling a pre-set programme, so the
appliance will remain off all the time.
Note:
(a) The pre-set function of random activation/deacti-
vation will work only if the switch is in the AUTO mode.
(b) If the Random function is activated, the auto on/
off functions of the set programmes are inoperative.
I. Installation
1. Set the required on/off programmes at the
switch, as described above.
2. Turn the electric appliance off.
3. Plug the supply cable of the appliance into
the socket of the switch and then connect the
switch to the power supply.
4. Turn the appliance on.
5. The appliance will be on/off according to the
programmes, you chose, unless you push
manual cancelling of the setting.
J. Safety warning
• If the display does not work, plug the switch
into a 230 V AC socket and let it recharge. In cca
2 hours the display will light up and the switch
will be fully functional. To fully recharge, leave
it plugged in for cca 12 hours.
3