Selecting Elements (Cs6X); Switching Elements On/Off (Cs6X) - Yamaha CS6X Owner's Manual

Selecting Elements (CS6x)

In Voice Edit Mode, you can select the Element
to edit by pressing the respective ELEMENT
SELECT key ([1] to [4]). When you select an
Element, the cursor moves to the respective
Element Number.
Example: When "Element 2" is selected
A B C D E F
1 2 3 4 1 2
ELEMENT SELECT ELEMENT ON
EQ Param)LoFreq LoGain
EL12_ 3 4 274.2Hz +12 2.82kHz
Cursor

Switching Elements On/Off (CS6x)

In Voice Edit Mode, an Element can be
switched off when you press the respective
ELEMENT ON/OFF key ([1] to [4]). This lets
you temporarily mute other Elements in the
Voice so that you can listen to the changes to
the Element that you are editing. A muted
(off) Element will be indicated as an asterisk
(*) in the display as illustrated below.
Example: When Elements 2 and 3 are
turned off
A B C D E F
1 2 3 4 1 2
ELEMENT SELECT ELEMENT ON
EQ Param)LoFreq LoGain
EL1**4 274.2Hz +12 2.82kHz
off off
Switching Between Screens and Entering Settings
After selecting a Common Edit screen or a edit
screen for an Element (1 to 4), use the [PAGE]
knob to switch to other screens.
SHIFT
There are many parameters available within a
screen. To make editing easier, the knobs
below the LCD are assigned to each of the
parameters in the screen.
SHIFT
G H
BANK
3 4
OFF
/
Menu Screen
If you use the [PAGE] knob while holding
HiFreq HiGain
+22
down the [SHIFT] key, the settings menu will
be displayed. Use the [PAGE] knob to move
the cursor to an item and release the [SHIFT]
key to jump to the screen for that item.
SHIFT
G H
BANK
3 4
3 Common Edit Screens
OFF
/
Each Voice consists of up to four Elements. Here, the
parameters common to all Elements are explained.
HiFreq HiGain
+22
• GEN (Common General)
Here, you can set general parameters in Common
Edit, such as the Voice Name.
GENíName) Ctgry
C 1234
61
AMP Scale)Ofst1 Ofst2
EL12_ 3 4 + 0 + 0
PAGE A B C
PART ELEMENT
/
AMP Scale)Ofst1 Ofst2
EL12_ 3 4 + 0 + 0
PAGE A B C
PART ELEMENT
/
Cursor
GENíOther) Com:>GEN≥QED>ARP>CTL>LFO>EFF
C 1234 Elem:>OSC>PCH>FLT>AMP>LFO>EQ
PAGE A B C
PART ELEMENT
/
You can also use other knobs and keys to enter
settings. The Compare featureallows you to compare
the sound being edited against the sound prior to
editing. Details are given on Pages 24, 79.
a-Z
Pfst3 Ofst4
- 21 - 35
1 2 DATA
Pfst3 Ofst4
- 21 - 35
1 2 DATA
1 2 DATA
0-? Cursor
[Pf:Init Voice]