Yamaha CS6X Owner's Manual page 128

InsEF (Insertion Effect)
Assign a Part to an Insertion Effect. Select "off" if
you do not wish to assign the Part to an Insertion
Effect. Furthermore, if Plug-in Boards have been
installed, they will also be selectable as Plug-in Parts
1 and 2.
Settings:
normal Part:
Part01 ~ Part16, PartAD (A/D Input Part), PartCL (Phrase
Clip Part), off
Plug-in Part (if installed):
PartP1 (Plug-in Part 1), PartP2 (Plug-in Part 2), off
PLG-EF (Plug-in Effect)
Assign a Part to the Plug-in Effect. Select "off" if
you do not wish to assign the Part to a Plug-in
Effect. These parameters are only available if an
Insertion Effect Plug-in board has been installed.
Settings:
normal Part:
Part01 ~ Part16, PartAD (A/D Input Part), PartCL (Phrase
Clip Part), off
EFF Rev (Reverb)
You can select the Reverb Effect Type and set its
parameters by pressing the [ENTER] key.
EFFíRev) Type
Common Basement
Type (Reverb Effect Type)
Set the Reverb Effect Type.
Settings: Details are given in the Effect Types list of the
separate Data List.
Return
Set the Return level of the Reverb Effect.
Settings: 0 ~ 127
EFF Cho (Chorus)
You can select the Chorus Effect Type and set its
parameters by pressing the [ENTER] key.
EFFíCho) Type
Common Chorus1
Return [ENTER]
127 to Edit
toRev Return [ENTER]
127 127 to Edit
Type (Chorus Effect Type)
Set the Chorus Effect Type.
Settings: Details are given in the Effect Types list of the
separate Data List.
toRev (To Reverb)
Set the Send level of the signal sent from the Chorus
Effect to the Reverb Effect.
Settings: 0 ~ 127
Return
Set the Return level of the Chorus Effect.
Settings: 0 ~ 127
If an Insertion Effect Plug-in Board has been installed,
you will see the EFF Plg (Plug-in) screen following the
EFF Cho (Chorus) screen.
Effect Parameter Settings
The EFF Rev and EFF Cho parameter screens are
available when you select the Effect and press the
[ENTER] key. If an Insertion Effect Plug-in Board
has been installed, you can enter the parameters for
the Plug-in Effect at the EFF Plg (Plug-in) screen.
Use the [PAGE] knob to switch between screens,
and use the other knobs and the [INC/YES] and
[DEC/NO] keys to set each parameter.
When you press the [EXIT] key, you will be
returned to the Effect Type selection screen.
EFFíRev) Type
Common Basement
EFFíRev)RevTime InitDly
Basement
SHIFT PAGE A
PART/ELEMENT
The number of Parameters and the contents of each
screen will vary depending on the selected Effect
Type. Details are given in the Effect Types list of
the separate Data List.
128
Return [ENTER]
127 to Edit
EXIT ENTER
RevDly Pan
0.6s 4.8ms 5.05ms C
B C 1 2 DATA