M.eq Low (Master Eq Low); M.eq High (Master Eq High); M.eq Mid (Master Eq Middle Range); Ctrl (Voice Controller) - Yamaha CS6X Owner's Manual

Control synthesizer/tone generator
Hide thumbs Also See for CS6X:
Table of Contents

Advertisement

M.EQ Low (Master EQ Low)

This Equalizer covers low frequencies. You can adjust
the signal level at the specified frequency. You can also
select different Equalizer types (Shapes).
M.EQ Low) Shape
Vce
peak
Shape
Select either a Shelving or Peaking equalizer. The
Peaking type attenuates/boosts the signal at the
specified Frequency setting, whereas the Shelving
type attenuates/boosts the signal at frequencies
above or below the specified Frequency setting.
Settings: shelv (Shelving), peak (Peaking)
Details about the shapes of the Shelving and Peaking
Types are given on Page 126.
Gain
Set the Gain. This attenuates or boosts frequencies
around the Frequency setting.
Settings: -12dB ~ 0dB ~ +12dB
Freq (Frequency)
Set the center frequency. Frequencies around this
point are attenuated/boosted by the Gain setting.
Settings: 32Hz ~ 2.0kHz
Q (Frequency Characteristic)
This varies the signal level at the Frequency setting
to create various frequency curve characteristics.
Settings: 0.1 ~ 12.0
M.EQ LowMid
(Master EQ Low-Middle Range)

M.EQ Mid (Master EQ Middle Range)

M.EQ HighMid
(Master EQ High-Middle Range)
These Equalizers cover low-to-middle, middle and high-
to-middle frequency ranges. They can be used to adjust
the signal level around the specified frequency.
M.EQ LowMid)
Vce
M.EQ Mid)
Vce
M.EQ HighMid)
Vce
Gain
Freq
Q
+12dB
50Hz
12.0
Gain
Freq
Q
+12dB
100Hz
12.0
Gain
Freq
Q
+12dB
100Hz
12.0
Gain
Freq
Q
+12dB
100Hz
12.0
Gain
Set the Gain. This attenuates or boosts frequencies
around the Frequency setting.
Settings: -12dB ~ 0dB ~ +12dB
Freq (Frequency)
Set the center frequency. Frequencies around this
point are attenuated/boosted by the Gain setting.
Settings: 100Hz ~ 10kHz
Q (Frequency Characteristic)
This varies the signal level at the Frequency setting
to create various frequency curve characteristics.
Settings: 0.1 ~ 12.0

M.EQ High (Master EQ High)

This Equalizer covers high frequencies. You can adjust
the signal level at the specified frequency. You can also
select different Equalizer types (Shapes).
M.EQ High)Shape
Vce
peak
Shape
Select either a Shelving or Peaking equalizer. The
Peaking type attenuates/boosts the signal at the
specified Frequency setting, whereas the Shelving
type attenuates/boosts the signal at frequencies
above or below the specified Frequency setting.
Settings: shelv (Shelving), peak (Peaking)
Gain
Set the Gain. This attenuates or boosts frequencies
around the Frequency setting.
Settings: -12dB ~ 0dB ~ +12dB
Freq (Frequency)
Set the center frequency. Frequencies around this
point are attenuated/boosted by the Gain setting.
Settings: 500Hz ~ 16kHz
Q (Frequency Characteristic)
This varies the signal level at the Frequency setting
to create various frequency curve characteristics.
Settings: 0.1 ~ 12.0

CTRL (Voice Controller)

You can assign MIDI Control Change Numbers to the
controllers and front panel knobs. For example, Knob
[1]/[2] can be set to control the amount of effect
applied to a sound and the Foot Controller can be set to
control modulation. These Control Change Number
assignments are known as "Controller Assign." The
following two screens are available.
CTRL Assign1 (Controller Assign 1)
CTRL Assign2 (Controller Assign 2)
168
Gain
Freq
Q
+12dB
0.5kHz
12.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs6r

Table of Contents