Yamaha CS6X Owner's Manual page 120

Control synthesizer/tone generator
Hide thumbs Also See for CS6X:
Table of Contents

Advertisement

3Use Knob [B] or the [DATA] knob or the [DEC/NO]
and [INC/YES] keys to adjust the parameter settings
for each Part.
4Repeat steps 2 and 3 for each of the other Parts.
To avoid losing the settings, make sure you store the
Performance before exiting to another Mode or selecting
another Performance. Details about how to store
Performances are given on Page 141.
Reading the Displayed Settings
Screens 3 to 7 have the following functions.
PFM Mlt)NoteSft
L
Part01
+ 0
-_ _ - _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PFM Mlt)ChoSend
Part01
127
-_ _ - _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PFM Mlt)RevSend
Part01
127
PFM Mlt)
Pan
Part01
L63
PFM Mlt) Volume
Part01
2
1
5
Common
PartAD
PartCL
PartP1
1 Parameter: shows the parameter settings
2 Part: shows the currently selected Part
3 Value: shows the setting for the currently
selected Part
4 Bar graph: shows the settings for each Part as a
bar graph
Common (Layer Common)
PartCL (Phrase Clip Part)
PartAD (A/D Input Part)
PartP1 (Plug-in 1 Part)
PartP2 (Plug-in 2 Part)
Part01 ~ Part16 (Voice Parts 1 ~ 16)
5 Layer Switch on/off: displays a "L" mark above
the bar graph for Parts which have their Layer
Switch set to "on."
6 Mute on/off: displays a "*" mark above the bar
graph for Parts which are muted. Press the
[ENTER] key to switch mute on/off for the
currently selected Part.
If a multitimbral Plug-in board is installed in Plug-in
Slot 2, PartP2 (Plug-in 2 Part) will no longer be
available. However, you will now be able to select
Part17 to Part32 (Voice Parts 17 to 32). A "
is displayed to the right of the bar graph, indicating
that there are more Parts available. If you select
Part17 to Part32, the bar graph shows the settings
for those Parts.
PFM Mlt) Volume
Part01
127
PFM Mlt) Volume
Part17
127
*
L
*
L
*
-_ _ - _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L
*
-_ _ - _ - _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
L
*
127_ _ _ _
_ _ _ _ _ _ _ _ _ _ _
3
4
6
PartP2
PartP01 ~ 16
" mark
L
*
Part17~Part32
3rd Screen: PFM Mlt) Volume (Performance
Multi: Volume)
Set the output level (volume) of each Part.
PFM*Mlt) Volume
Part01
127
Settings: 0 ~ 127
4th Screen: PFM Mlt) Pan (Performance Multi: Pan)
Set the stereo pan position for each Part.
PFM Mlt)
Pan
Part01
L63
Settings: L63 ~ C ~ R63
5th Screen: PFM Mlt) RevSend (Performance
Multi: Reverb Send)
For each Part, set the Send level of the signal sent
from Insertion Effect 1/2 (or the bypassed signal) to
the Reverb effect.
PFM Mlt)RevSend
Part01
127
Settings: 0 ~ 127
6th Screen: PFM Mlt) ChoSend (Performance
Multi: Chorus Send)
For each Part, set the Send level of the signal sent
from Insertion Effect 1/2 (or the bypassed signal) to
the Chorus effect.
PFM Mlt)ChoSend
Part01
127
Settings: 0 ~ 127
7th Screen: PFM Mlt) NoteSft (Performance
Multi: Note Shift)
Set the amount (in semitones) by which the pitch of
each Part is offset. You can adjust the offset up or
down by up to two octaves.
PFM Mlt)NoteSft
Part01
+ 0
Settings: -24 ~ 0 ~ +24
120
L
*
L
*
L
*
L
*
L
*

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs6r

Table of Contents