Installing The Mattress Keeper Rod - Invacare Carroll CS Series User Manual

Invacare® Carroll CS Series™
DANGER!
Risk Of Injury Or Damage
To avoid injury or damage:
– Ensure that the connectors are plugged into
the junction box and fit properly.

4.4 Installing the Mattress Keeper Rod

WARNING!
Risk of Injury or Damage
To avoid a risk of entrapment due to gaps
between the bed ends or rails and the mattress:
– Install the mattress keeper rods correctly and
test to make sure they are securely in place
before use.
The mattress keeper rods hold the mattress in place.
Install them in the head and foot decks.
30
1. With the mattress keeper upright, insert the rod ends
into the appropriate deck holes.
2. There are two choices for mattress keeper rod insertion.
The 76 inch bed option should use the insertion holes
closer to the inside of the bed, while the 80 inch bed
option should use the holes closer to the outside of
the bed.
76 inch Bed Option for All
Models Except CS9FX600
Fig. 4-10
76 inch Bed Option for
Model CS9FX600
Fig. 4-12
80 inch Bed Option for All
Models Except CS9FX600
Fig. 4-11
80 inch Bed Option for
Model CS9FX600
Fig. 4-13
1153410-Q