Installing/Removing Mattress Keepers - Invacare G5510 User Manual

Pendant
Connector
Flat Edge
6.6

Installing/Removing Mattress Keepers


Recommended location for mattress keepers in on the end slat on either side of the bed.
Installing
1. Position mattress keeper over end slat as shown in Detail "B".
2. Slide mattress keeper back until tab locks onto side rail as shown in Detail "C".
Removing
1. Grasp mattress keeper and lift tab up to release from side rail (Detail "B").
2. Slide mattress keeper off of end slat (Detail "B").
Part No 1180159
6 DEALER SECTION - PACKAGING, HANDLING, AND SET-UP
Port Cover
Flat Edge of Port Cover
FIGURE 10 Electrical Connections
55
Flat Edge of Pendant Connector
Pendant/Port
Cover Connection
Pendant
Connector
®
Invacare G5510 Bed