Checking Gear Box Oil Level; Greasing - Kubota GR2000 Operator's Manual

.Checking Gear Box Oil Level
A
CAUTION
To avoid personal injury:
• Always stop the engine and remove the key
before checking oil.
1. Park the machine on a flat surface and lower the
mower to the ground.
To check the oil level, loosen filler plug and check to
see that the oil level is just below the filler plug port.
If the level is too low, add new oil to the prescribed
level at the oil inlet.
(See "LUBRICANTS" in "MAINTENANCE" section.)
1BDABBSAP106A
(1) Checking plug (Bolt)
(2) Oil filler plug
.Greasing
A
CAUTION
PERIODIC SERVICE 47
To avoid personal injury:
• Be sure to stop the engine and remove the key
before greasing.
Grease the following location.
1 BDAHADAP098A
(1) Engine transmission universal joint
(Apply grease on the spline shaft.)
1 BDAHADAPOOBA
(1) Center pin
(1) Support king pin (LH, RH)
(2) Glide steer bolt