Checking Mower Belt; Checking Gear Box Oil Level; Greasing Spindle Shafts, Belt Tension Pivot And Tension Pulley - Kubota WSM BX1880 Workshop Manual

CHECK AND MAINTENANCE
2. Mower

2.1.3 Checking mower belt

1. Inspect the mower belt.
2. Replace the mower belt, if there is any damage
found.

2.1.4 Checking gear box oil level

IMPORTANT
• Use the specified gear oil.
(1) Check plug
(2) Oil filler plug
(3) Drain plug
[A] RCK60B-23BX,
RCK54-23BX, and
RCK48-18BX
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
[B] RCK60D-26BX and
RCK54D-26BX
1. Place the mower on level ground.
2. Loosen the check plug (1), and check to see if oil
seems from the opening.
3. If the oil level is low, remove the oil filler plug (2)
and add new gear oil.
RELATED PAGE
2.1 Lubricants on page 2-11
2.1.5 Greasing spindle shafts, belt tension
pivot and tension pulley
1. Grease the grease fittings (1), (2) of the spindle
shafts if the amount of grease is insufficient.
2. GENERAL
2-43
KiSC issued 03, 2019 A