Table of Contents
Advertisement
2
Assembly instructions
Never work under the implement during loading, unloading or installation work. Pay close atten-
tion to safety! The implement is very heavy.Only use lifting devices that have sufficient lifting
capacity. For weight indications, see "5.2 Technical data" on page 26.
Depending on the transport method and other factors, the implement is delivered more or less as-
sembled from the factory. Use the instructions below that apply.
2.1
Loading and unloading
Figure 2.1
The implement is usually delivered with the tow connector and the preimplements packed on top
of the frame. The rear axle hydraulic ram has been removed and the rear axle has been moved for-
ward.
Lift the roller from the bed of the lorry using a fork lift. Use the transport support as shown in "Fig-
ure 2.1".
14.04.2014
ver.2
RST 330-400
13
Advertisement
Table of Contents
