Table of Contents
Advertisement
Assembly instructions
2.2
Assembly
1 Unload the preimplements and the two connector from the frame.
2 Disassemble the transport support. See "Figure 2.1". (Please return the support to Väderstad-
Verken).
3 Assemble the preimplement in the quick connector supports as shown in "Figure 2.2", A - C,
using a traversing crane or a loader. Be sure to lock the preimplements using cotters and lock-
ing pins (D).
A
C
Figure 2.2
14
B
D
14.04.2014
ver. 2
Advertisement
Table of Contents
