7 Installation and Commissioning
7.2 Network connections
Note
Always follow the installation guidelines in order to connect all the components.
SIMATIC S7-1500
SIPLUS HCS 4200: Chapter "Safety information and guidelines" (\4\)
SIPLUS HCS 4300: Chapter "Safety information and guidelines" (\5\)
Table 7-1
No.
1.
Mount the SIPLUS HCS4200 and connect it
(\10\).
2.
Wire and connect all other required
components as described.
3.
Plug the empty memory card into the S7-1500
CPU
(Table
2-2).
4.
Finally, connect the SIMATIC PM 1507 power
supply module to the AC power system
(230 V) and supply the HCS with power.
7.2
Network connections
The LAN network card of the programming device requires a static IP address to
configure the controller.
The configuration of the LAN connection is described in the following.
Table 7-2
No.
Click "Start > Control Panel > Network and
1.
Sharing Center > Change adapter settings"
to open the network connections.
Select your network connection.
Right-click to open the properties.
HCS4x00Library
Entry ID: 109478117,
V2.2.1,
(\8\)
Action
Action
09/2018
Remark
When using the SIPLUS HCS4300 see
See S7-1500 Manual (\8\)
See chapter "Plug/Pull SIMATIC Memory Card
at the CPU" (S7-1500 manual \8\)
Remark
\11\
63