Xerox SquareFold Trimmer Module User Manual page 22

Problem solving
Fault code
Jam or communication error
with the SquareFold
Trimmer Module
Jam/fault with the
SquareFold Trimmer Module
18
Possible cause
1.
2. If fault persists, call for service.
1.
2. Carefully remove all sheets and paper scraps from jam
3.
4.
5.
6.
Recommended solution
Power off/on the copier/printer.
Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
clearance areas.
Close the SquareFold Trimmer Module Top Left and Right
Covers.
Check the Trimmer Waste Container:
• If full, empty the container and reinsert it into the
SquareFold Trimmer Module.
• If the container is partially pulled out, push it
completely in.
If machine's UI continues to reflect a fault/jam, open the
finisher and remove any jams.
• Close the finisher cover(s).
Follow the instructions shown on the machine's UI to
resume printing/copying.
SquareFold Trimmer Module
User Guide