Xerox SquareFold Trimmer Module User Manual page 14

Overview
Network print jobs
For network print jobs, the Trimmer feature can be accessed from the print driver options either from your workstation
(before the job is submitted for printing) or at the print server (after the job is submitted for printing). To access the
Trimmer feature for network print jobs, perform the following:
For jobs on your workstation, continue to the next step.
1.
For jobs at the print server, continue to Step 3.
From your workstation, open the desired job in its appropriate application (for example, Microsoft Word or Adobe
2.
Reader).
• Select File and Print.
Print window, select the desired printer (with the SquareFold Trimmer Module attached to it),
• From the
and then select Properties for that printer.
• Continue to Step 4.
From the print server, open the Properties of the desired job:
3.
• Double click on the job (from either the Hold or Printed Jobs queues).
• From the Properties window, go to the Finishing/Output tab.
• Continue to the next step.
Ensure that the correct output tray is selected (Booklet Maker Tray).
4.
If necessary, ensure that the correct Stapling/Finishing/Folding features are selected.
5.
Select the desired Trimmer option. For information on each Trimmer option, continue to the section entitled
6.
"Trimmer options."
10
SquareFold Trimmer Module
User Guide