Connecting The Washing Machine - Hanseatic HWMB714A3 User Manual

Connecting the washing
machine
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
Only use the hoses supplied (water in-
■
let and outlet hose). Do not use old
hoses.
Do not extend or replace the hoses
■
with others.
The hoses should not be kinked or
■
twisted.
CAUTION: Do not connect to the hot
■
water supply.
Only connect the appliance to a wa-
■
ter supply with an inlet water pressure
between 0.1 MPa and 1.0 MPa (1.0 to
10.0 bar). For higher water pressure,
a pressure regulator needs to be or-
dered. Contact your water company
for the water pressure, if necessary.
Only hand-tighten the union nut of
■
the inlet hose on the valve. Do not
use a pipe wrench, otherwise the un-
ion nut may be damaged.
Installing and connecting the washing machine
Creating a water drain
There are several options for connecting the
outlet hose:
Variant 1: Connect outlet hose directly to a
siphon .
Variant 2: Allow suds to drain into a floor drain .
Variant 3: Allow suds to drain into a wash ba-
sin or bath .
Page GB-25