Server Fax - Xerox WorkCentre 4260C Quick Use Manual

Server Fax

The Server Fax feature enables Users to send documents to one or more fax machines
via the telephone network without having a dedicated telephone line connected to
the machine This is achieved by connecting the machine to a network Fax Server
which can manage fax transmissions throughout an organisation.
Installing the kit
1
Install the kit. Refer to Installing Option Kits on page 16.
Enable Server Fax
2
Press the Log In/Out button on the Control Panel, enter the Administrator's
Password [1111] and select Enter.
3
Press the Machine Status button then select Tools > User Interface > Service
Enablements > Server Fax.
4
If you are prompted to enter a PIN, enter Code A shown on page ii of the Server Fax
Kit Instructions. Press Enter.
5
If an Enable button is displayed, select Enable.
6
Select Save.
7
Press the Log In/Out button and select Confirm to logout and close the Tools menu.
8
The machine will reboot automatically. The machine takes approximately 2-3
minutes to reboot.
NOTE:
Refer to the System Administration Guide for more information.
quick use guide 17