Specialty Printing; Automatic 2-Sided Printing; Guidelines For Automatic 2-Sided Printing; Binding Preferences - Xerox PHASER Phaser 4400 Paper Manual

Specialty Printing

This section covers:
I Automatic 2-sided printing — see page 16.
I Manual 2-sided printing — see page 19.
I Transparencies — see page 25.
I Envelopes — see page 27.
Labels — see page 31.
I
For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,
refer to the Supported Papers section of the Trays and Paper Guide on the Interactive Documentation
CD-ROM.

Automatic 2-sided printing

Guidelines for automatic 2-sided printing

I
The printer must have an optional duplex unit installed.
I
The paper must have a weight of 60 – 105 g/m
I
The paper size can be Letter, Legal, Executive, US Folio, A4, B5 JIS, and Custom sizes
between 182 – 216 mm (7.16 – 8.5 inches) wide and 257 – 356 mm (10.12 – 14.0 inches) long.
I
The paper type must be Plain Paper, Card Stock (not exceeding the weight limits listed above),
Letterhead, Colored Paper, or Special.
Caution
DO NOT use transparencies, envelopes, or labels for automatic 2-sided printing. Any
damage caused by duplexing these are not covered under your printer's warranty.

Binding preferences

When you print any job, you can use the printer driver to select the orientation of the images on the
page: Portrait or Landscape. When you print 2-sided jobs, you also select the binding preference,
which determines how the pages turn.
Portrait
Bind on Side (Long) Edge
Copyright © 2002 Xerox Corporation. All Rights Reserved.
2
Portrait Landscape
Bind on Top (Short) Edge Bind on Top (Long) Edge
Phaser™ 4400 Laser Printer
(16 – 28 lb. bond).
Landscape
Bind on Side (Short) Edge
16