Correct Use; Device Types; Type Of Use; For Use In Potentially Explosive Areas - WAGNER ZIP52 Translation Of The Original Operating Manual

VERSION 11/2018
2

CORRECT USE

2.1

DEVICE TYPES

Pneumatic double diaphragm pumps with order number:
A: Metallic versions in aluminum and stainless steel.
U550.ATRD7
U550.ATSS7
U550.ATSS8
U550.STSS7
B: Conductive acetal versions.
U552.GHSS1
U552.GHSS7
C: Non-conductive polypropylene versions.
U552.PTSS7
--
2.2

TYPE OF USE

The device is suitable for processing liquid products like paints and lacquers:
A) Metallic versions (aluminum and stainless steel)
B) Conductive acetal versions
– Products in accordance with their classification in explosion class IIB.
– Non-ignitable products.
C) Non-conductive polypropylene versions
– Non-ignitable products.
WAGNER explicitly prohibits any other use!
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
2.3

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

A) Metallic versions (aluminum and stainless steel)
B) Conductive acetal versions
The device can be employed in explosion hazard zones (Zone 1) (see Chapter 3).
C) Non-conductive polypropylene versions
The pneumatic double diaphragm pump must be employed outside of explosion hazard
zones.
ORDER NUMBER DOC 2330426
U551.ATSS7
U551.303
--
--
U553.GTSS1
--
U553.PHSD7
U553.PTSS7
U555.ATSS7
--
--
--
ZIP 52/80
8