Table of Contents
Advertisement
H-XP2 SERIES
Full Load
Peak Amps*
Part, Series
Per Phase
255403, E
100
255404, E
59
255405, E
35
H-XP3 SERIES
Full Load
Peak Amps*
Part, Series
Per Phase
★253403, E
100
253404, E
95
253405, E
52
* Full load amps with all devices operating at maximum capabilities. Fuse requirements at vari-
ous flow rates and mix chamber sizes may be less.
Total system watts, based on maximum hose length for each unit:
†
• Parts 255400 through 255408, 310 ft (94.6 m) maximum heated hose length, including whip
hose.
• Parts 253400 through 253408, 253725 through 253727, 256505, and 256506, 410 ft (125 m)
maximum heated hose length, including whip hose.
◆
Maximum flow rate given for 60 Hz operation. For 50 Hz operation, maximum flow rate is 5/6 of
60 Hz maximum flow.
★CE approval does not apply.
4
Primary
Voltage
System
Heater
(phase)
Watts†
Watts
230V (1)
23,260
15,300
230V (3)
23,260
15,300
400V (3)
23,260
15,300
Primary
Voltage
System
Heater
(phase)
Watts†
Watts
230V (1)
23,100
12,000
230V (3)
31,700
20,400
400V (3)
31,700
20,400
Approximate
Max Flow
Output per
Rate◆
Cycle (A+B)
gpm (lpm)
gal. (liter)
1.5 (5.7)
0.042 (0.16)
1.5 (5.7)
0.042 (0.16)
1.5 (5.7)
0.042 (0.16)
Approximate
Max Flow
Output per
Rate◆
Cycle (A+B)
gpm (lpm)
gal. (liter)
2.8 (10.6)
0.042 (0.16)
2.8 (10.6)
0.042 (0.16)
2.8 (10.6)
0.042 (0.16)
Models
Maximum Fluid
Hydraulic
Working
Pressure
Pressure
Ratio
psi (MPa, bar)
2.79:1
3500 (24.1, 241)
2.79:1
3500 (24.1, 241)
2.79:1
3500 (24.1, 241)
Maximum Fluid
Hydraulic
Working
Pressure
Pressure
Ratio
psi (MPa, bar)
2.79:1
3500 (24.1, 241)
2.79:1
3500 (24.1, 241)
2.79:1
3500 (24.1, 241)
Advertisement
Table of Contents
