Test Print Or Scan; Test Scan - Xerox WorkCentre PE120i System Administration Manual

Test Print or Scan

To ensure the WorkCentre PE120i has been installed correctly a test print or scan should be
submitted from the workstation.
Test Print
Perform the following steps:
Open a document on the workstation.
1
Select the WorkCentre PE120i as the printer to which the document will be sent.
2
Print the selected document on the device and verify that it prints correctly.
3
The installation process is now complete.
4

Test Scan

Open the Twain compliant application used to scan documents.
1
Place a document in the WorkCentre PE120i.
2
Follow the instructions for scanning from the Help supplied by the application to scan
3
verify that it scans correctly.
The installation process is now complete.
4
Page 7-12 Xerox WorkCentre PE120i System Administration Guide